 |
|
PINS,
MEDALS AND COINS
|
|
 |
Cloisonné
& Semi-Cloisonné
Jewelry quality, hand crafted cloisonné
emblems make the most popular promotional statement for your logo.
Your design is die struck into copper metal which creates raised
and recessed areas. Glass based enamels are then hand filled into
the recessed areas and fired at a very high temperature to create
the finest emblems. Thin metal lines must separate each color.
When Pantone colors must be matched we use synthetic enamel called
Semi-Cloisonné. Prices include up to five colors, a military
clutch or a jump loop and your choice of plating.
get
a quote
|
 |
Die
Struck Soft Enamel
Quality die struck emblems at lower prices.
We use the same method of striking your image into copper as in
the cloisonné process. We then fill the recessed areas
with a plastic based or "soft enamel" pigment. Lower
curing temperatures and faster production keep the prices low
without sacrificing quality. Thin metal lines must separate each
color. Prices include up to five colors, an epoxy dome to protect
the finish, a military clutch or a jump loop and your choice of
plating.
get
a quote
|
 |
Photo
Etched Soft Enamel
This is a great process for complex designs.
Your design is chemically etched into brass which creates raised
and recessed areas. The recessed areas are then filled with a
soft enamel pigment. Thin metal lines must separate each color.
Prices include up to five colors, an epoxy dome to protect the
finish, a military clutch or a jump loop and your choice of plating.
get
a quote
|
 |
Iron
Soft Enamel
This is the most economical process. Iron soft
enamel is great for high volume promotional uses. Your design
is die struck into steel which creates raised and recessed areas.
The recessed areas are then filled with a soft enamel pigment.
Thin metal lines must separate each color. Prices include up to
four colors, an epoxy dome to protect the finish, a military clutch
or a jump loop and brass plating.
get
a quote
|
 |
Silkscreen
or Offset Printing
Your design is reproduced in either a photo
reproduction or an offset printing process. Each design is attached
to brass base metal then covered with a thin epoxy dome. Prices
include up to four screened colors or four color process printing,
a military clutch and brass plating.
get
a quote
|
 |
Die
Struck High Polish
Your design is die struck into copper base
metal creating raised and recessed areas. Each emblem is plated
to a high polish finish. Prices include a military clutch or a
jump loop and your choice of plating.
Interior holes and cutouts are additional.
get
a quote
|
 |
Die
Struck Sandblast
Your design is die struck into copper base
metal creating raised and recessed areas. Each emblem is plated
with a two-tone "Sandblast" finish. Prices include a
military clutch or a jump loop and your choice of plating. Interior
holes and cutouts are additional.
get
a quote
|
 |
Die
Struck Antique
Your design is die struck into copper base
metal creating raised and recessed areas. Each emblem is plated
with an antique finish. Prices include a military clutch or a
jump loop and your choice of plating. Interior
holes and cutouts are additional.
get
a quote
|
 |
Cast
Pewter
Your design is created with a mold rather than
a die. Spin cast pewter is used to manufacture dimensional emblems.
Cast emblems are heavier and thicker than struck emblems. Prices
include a military clutch or a jump loop and your choice of plating.
get
a quote
|
 |
Cast
Zinc Alloy
One of the most versatile materials used to
manufacture custom emblems. Molten metal is injected into a mold,
cooled, cleaned and plated. Few materials offer zinc’s strength,
quality and dimensional characteristics. Zinc Alloy emblems are
lead free. Zinc Alloy emblems have unlimited design possibilities.
get
a quote
|
| |
PATCHES,
PVC AND LANYARDS
|
 |
Patches:
Our beautifully embroidered emblems are made
from the finest materials. Durable, colorful and washable patches
are a great way to promote your logo. Prices include up to seven
colors and a plain back.
get
a quote
|
| |
PVC:
PVC is an injection-molded process that is
lightweight, flexible, colorful and durable. PVC emblems have
many uses including: Key chains, pins, zipper pulls, refrigerator
magnets, paper clips, plastic clips, labels, coasters, pouches,
luggage tags, picture frames, clocks and mugs.
get
a quote
|
| |
Lanyards
and Credential Holders:
Create a unique statement at your next event
with our custom printed lanyards and credential holders. Our lanyards
are made from high quality nylon and are available in various
widths. Our credential holders are made from clear vinyl and are
available plain or custom printed.
get
a quote
back to top
|
